Clean Bottom Fabric and Vinyl Cutter For Tumbler Making
This Fabric and Vinyl Cutter is set up to cut from around 1/8 to 1 inch. Each gap goes up around 1/8 in with each slot. The cutter is designed to hold a single-edge industrial razor blade about 1.5 inches long. The blade is inserted in through the front and needs to be pushed fully in. It does not require a ton of pressure, it just needs to be wedged into the back of the tool. The V in the back of the cutter allows you to pop out the blade with your finger easily.
Razer blades are not Included.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Clean Bottom Fabric and Vinyl Cutter For Tumbler Making
Clean Bottom Fabric and Vinyl Cutter For Tumbler Making
This Fabric and Vinyl Cutter is set up to cut from around 1/8 to 1 inch. Each gap goes up around 1/8 in with each slot. The cutter is designed to hold a single-edge industrial razor blade about 1.5 inches long. The blade is inserted in through the front and needs to be pushed fully in. It does not require a ton of pressure, it just needs to be wedged into the back of the tool. The V in the back of the cutter allows you to pop out the blade with your finger easily.
Razer blades are not Included.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This Fabric and Vinyl Cutter is set up to cut from around 1/8 to 1 inch. Each gap goes up around 1/8 in with each slot. The cutter is designed to hold a single-edge industrial razor blade about 1.5 inches long. The blade is inserted in through the front and needs to be pushed fully in. It does not require a ton of pressure, it just needs to be wedged into the back of the tool. The V in the back of the cutter allows you to pop out the blade with your finger easily.
Razer blades are not Included.
